Products > (Hitachi) pressure type followed by double-sided adhesive

Products standard

Taste date 11-572

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.15	28	1,200 50

USES and specialties:
Suitable for foam backing glue
Suitable for plastic materials
Wide application
The parting paper has a printed LOGO

Taste date 11-573

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.13	18	1,050 50

USES and specialties:
Applicable to all kinds of foam, flame retardant rubber and other rubber materials
Fixed attachment of parts
Initial viscosity

Taste date 11-575

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.13	19	1,200 50

USES and specialties:
Suitable for foam bonding
Suitable for the quality of Ming plate
It has good adhesion and good heat resistance

Taste date 11-578

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.13	22	1,200 50

USES and specialties:
Suitable for foam bonding
Initial viscosity

Taste date 11-579V

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.11	20	1,200 50

USES and specialties:
Suitable for foam bonding
Suitable for Ming board fitting
Good initial viscosity

Taste date 11-583

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.14	25	1,200 50

USES and specialties:
Suitable for polyolefine rubber materials such as PP and PE
Suitable for all kinds of materials such as Ming board, foam and metal plate
The flexural surface adhesion is good, and the antielasticity is good
Good heat resistance
Obtained the UL969 identification

Taste date 11-583B

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.14	25	1,200 50

USES and specialties:
This product is for the black model of 11-583
Good initial viscosity
Suitable for PP, PE and other polyolefin rubber materials
Suitable for the amplifier of loudspeaker net

Taste date 11-586H

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.16	23	1,050 50

USES and specialties:
Apply to PS, ABS and other plastic materials
Good anti-anti - elasticity, heat resistance and impact resistance
Keep good adhesion
Continuous processing good quality
- type paper with printed LOGO (no printed LOGO product model: 11-586)

Taste date 11-640T

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.17	25	1,050 50

USES and specialties:
Suitable for automotive interior decoration
Suitable for wool products and plastic molding
Wide use
Early adhesion is good
Use quick tear and not easy to break the tough material off type paper

Taste date 11-651

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.13	20	1,050 50

USES and specialties:
Low VOC corresponding
Suitable for polyolefin rubber material
Wide application

Taste date 11-652

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Nonwoven fabric	Acrylic resin	0.11	22	1,050 50

USES and specialties:
VOC corresponding to products from 11-5795
Suitable for foam bonding
Early adhesion is good

Taste date 12-541

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Special non-woven fabric	Acrylic adhesive system	0.32	40	980 20

USES and specialties:
Super strong adhesive tape
Suitable for automotive interior decoration, OA machine, building materials, pens
Fixed use of computer parts
The quality of materials such as Ming board is widely used
Good heat resistance
Anti - elastic good

Taste date 13-570

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Polyester film	Acrylic adhesive system	0.14	21	1,050 50

USES and specialties:
Suitable for foam and plastic material to be used widely
Initial adhesion
Strong polyester film base material, suitable for cutting into various sizes
The cutting stability is good

Taste date 13-578

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Polyester film	Acrylic adhesive system	0.13	19	1,050 50

USES and specialties:
The type of polyester film base material corresponding to 11-578
Suitable for foam bonding
Strong adhesion and good weather resistance
Use of semi-transparent rubber sheet to facilitate processing

Taste date 13-710

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Polyester film	Acrylic adhesive system	0.12	17/10	1,050 50

USES and specialties:
Can be stripped of double - sided adhesive
There is a difference between the two sides
(positive: solid adhesive; Back: weakly viscous can strip adhesive.
The backside special weak viscous design, heavy industry good

《Taste date 13-700 series》

Taste date 13-701-30

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Polyester film	Acrylic adhesive system	0.03	10	1,050 50

Taste date 13-703-50

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Polyester film	Acrylic adhesive system	0.05	15	1,050 50

Taste date 13-704-100

Base material	The principal components	thickness (mm)	sticky (N/20mm)	Maximum width (mm) Standard lengh (m)
Polyester film	Acrylic adhesive system	0.10	17	1,050 50

USES and specialties:
Suitable for thin stretch rubber and foam bonding
The base material contains 50 mu of m polyolefin material
It is helpful to prevent deformation during punch processing